No. Unfortunately the only model variations we can offer are what is shown on the product page. We are not able to mix-and-match handlebar types with frame types. This is another way we can streamline everything and provide quality e-bikes at these prices. 


You can of course buy 3rd party handlebars separately online. They are relatively easy to swap. See the information below:


Every open (ST) model comes stock with swept back handlebars. 

Every traditional (XR) model comes stock with straight riser handlebars.

Every 700 series regardless of frame style comes stock with an adjustable stem. This will provide a more upright ride/posture by default.


If you want to achieve a more upright posture for a relaxed ride, this can be done with a couple easy and inexpensive upgrades!


When changing the components below, please verify it is the proper component for your bike. Depending on the fit, you may need to add or remove cylindrical spacers. These can be purchased easily online or at your local bike shop.


1) Stem

- Higher Angle Stem:  All of our forks are the standard 28.6mm (1-1/8") in diameter. Make sure you match the diameter of your handlebars clamp (25.4mm, or 31.8mm)




-Stem Extender:  All of our forks are the standard 28.6mm (1-1/8") in diameter. 




2) Handlebars 

Cafe or Pullback handlebars are a great solution for a more upright posture. These can be found in bike shops or online pretty quickly. Make sure you buy the correct size bar clamp diameter. That is the only size that should matter.


Roadsters, 500 Series - 25.4mm

Core5, 700, LMTD - 31.8mm




NOTE: If you change the handlebars to cruiser bars, in combination with extending the stem, you may not have enough cable slack for proper installation. In most cases this isn't an issue, but it is best to check your bike first to ensure your cables and wires will reach. It is usually no problem, but you may have to adjust derailleur cable, brake cable, or wires.