These models have wiring that is permanently attached to the bottom bracket and routes through the frame in to the downtube. 

  • LMT'd Torque - Torque sensor bottom bracket.
  • Roadster V2 & Gravel - Cadence sensor bottom bracket.


Do not tighten, service, or adjust your bottom bracket without contacting us first.

PAS not working properly? Clicking noise or feeling when you are pedaling? For any reason if you need to inspect, service, or adjust your bottom bracket, please contact us. This should be done before trying to diagnose symptoms related to the BB (Bottom Bracket) and before you give your bike to a mechanic who may or may not be familiar with bottom brackets with permanent wiring.


If you or a mechanic tries to adjust the cups of the bottom bracket, without taking the proper steps, your wiring may be permanently damaged. This video below is a great overview, however, it is slightly different in the LMT'D and Roadsters, as the wire goes into the down tube.