FindMy iOS Feature Walkthrough (currently only supported for Apple Products)
Stand next to the bike, make sure to have Bluetooth enabled on your iPhone prior to start.
- Turn Display on and press and hold (M) and (^) buttons for 5 seconds.
- A gray FindMy icon appears (this setting is now active)
- Unlock your iPhone and open FindMy App
- Go to Items located on the lower right of your screen.
- Click Add Item and click "other supported item" which should locate your bike.
- Once added, the FindMy icon stays visible on the main display interface.
To Disable FindMy:
1. Hold Mode (M) and (^) buttons for 5 seconds again to turn it off.
To Locate your bike:
1. Open FindMy App
2. Tap Route to navigate to your bike.
3. Tap play sound to activate light flash (no sound)
To Remove Device:
1. Nearby Display on, Remove from FindMyApp
2. Remote: Start removal in app, then long-press (M) and (^) buttons on display
Note: If device is not removed from both ends, it may stay registered to old device.
For additional information on your Vorsa display, please take a look at the Vorsa Display Guide.
