This written guide will walk you through assembling and attaching the Connect+ Large Cargo Basket.
You can also refer to the assembly video below.
Materials Needed
Connect+ Large Cargo Basket (included in the box)
Three black rods
Six silver bolts
Eight washers (optional)
Connect+ latch attachment
Basket plate
Four black bolts
Basket lining and cargo net
Screwdriver
Step-by-Step Instructions
Step 1: Assemble the Basket Frame
Insert the three black rods into one side of the basket.
Place the other half of the basket on top, ensuring it is fully attached.
Step 2: Secure the Basket Frame
Twist the rods to align the holes properly before inserting the bolts.
Take two silver bolts and two washers (optional) and screw them into the rod inserts on the rear side of the basket using a screwdriver.
Grab two additional silver bolts and washers (optional) and screw them into the front rod inserts of the basket.
Finally, take the last two silver bolts and screw them into the remaining rod inserts at the back of the basket.
Step 3: Install the Connect+ Attachment
Place the Connect+ latch attachment inside the basket to rest on top of the 6 tabs of the basket, ensuring the Connect+ mechanism is positioned towards the front.
Place the black basket plate on top of the Connect+ attachment, inside the the constructed basket, and align the holes.
Take the black bolts and screw them into the 6 tab inserts. (Optional: Use washers for the two front and rear bolts.)
Step 4: Attach the Basket Lining and Cargo Net
Using the velcro flaps, secure the basket lining along the edge of the basket.
Attach the cargo net over the top for added security.
Step 5: Attach the Basket to Your Bike
Use the Connect+ system to attach the basket securely.
Push down until you hear a click, confirming it is locked in place.
Step 6: Removing the Basket
To remove the basket, pull the Connect+ latch located under the basket.
Lift the basket off the rack.
Final Steps & Review
Ensure all bolts are tightened securely.
Test the basket attachment by pulling gently to confirm it is locked in place.
For any questions or additional assistance, please contact customer support.