Assembly/installation guides for various accessories, excluding Revv 1 accessories
This written guide will walk you through assembling and attaching the CF Racer1 Dual Battery Add-On Refer to the YouTube assembly video below: Mater...
Fri, Mar 28, 2025 at 4:01 PM
This written guide will walk you through assembling and attaching the Connect+ Small Basket. Materials Needed Connect+ Small Basket (2 end pieces) 4 ...
Fri, Mar 28, 2025 at 4:02 PM
This Connect+ Cooler is compatible with any model that advertises the Connect+ system. It will connect to the following bike/accessories: Cafe Cruiser...
Fri, Mar 28, 2025 at 4:03 PM
This written guide will walk you through assembling and attaching the Connect+ Large Cargo Basket. You can also refer to the assembly video below. ...
Tue, Mar 18, 2025 at 11:31 AM
Materials Needed 13mm open-end wrench Screwdriver M8 Bolts & Washers M5 Bolts Footpeg Passenger Seat Step-by-Step Instructions f...
Fri, Mar 28, 2025 at 4:04 PM
This written guide will walk you through assembling and attaching the Connect+ Pet Carrier Refer to the YouTube assembly video below: Materials Nee...
Fri, Mar 28, 2025 at 4:06 PM
Materials Needed Platform Rack for Portola or Vorsa Ride1Up Hex Key Set Step-by-Step Instructions Step 1: Unpack & Gather Components Gat...
Fri, Mar 28, 2025 at 4:07 PM
Materials Needed Platform Rack for Portola Front Basket (Provided with Rack) Front Light Extension Cable Zip Ties Cargo Net Ride1Up Hex Ke...
Fri, Mar 28, 2025 at 4:09 PM
This written guide will walk you through assembling and attaching the Connect+ Rear Rack You can also refer to the YouTube assembly video below: ...
Fri, Mar 28, 2025 at 4:10 PM
Materials Needed Rack Platform Two supporting Rods “V” Rods Two Connector Rods Short M5 Bolts Long M5 Bolts (use with fender set) M5 Nuts...
Fri, Mar 28, 2025 at 4:10 PM
