This Connect+ Cooler is compatible with any model that advertises the Connect+ system. It will connect to the following bike/accessories:
Cafe Cruiser (directly to integrated rear rack)
Portola (directly to integrated rear rack)
700 Series (rear rack with Connect+ logo only)
Prodigy v2 (directly with included rear rack) *do not exceed the rack’s 40 lb limit*
Rift (directly to integrated rear rack)
Revv 1 Connect+ Rear Rack and Handle
Ride1Up Rear Rack (separate purchase – ONLY fits CF Racer1, Core-5, Turris, LMT’D and LMT’D V2)
Roadster v3 Connect+ Rear Rack (separate purchase)
Materials Needed
Insulated Cooler
Preassembled Connect+ Attachment
Step-by-Step Instructions
Step 1: Unzip the cooler and align with Connect+ Rack
Align the cooler with your Connect+ compatible rack
Ensure that the Connect+ latch spring is resting against the rack connection point.
Note: Prior Generations of coolers will need to have Connect+ Latch connected prior to attaching the cooler to the rack.
Step 2: Attach the Cooler to Your Bike
Firmly push down through the center of the opened cooler until you hear a click.
Step 3: Removing the Cooler
To remove the cooler, pull the Connect+ latch located under the cooler away from the rack connection point.
Lift the cooler off the rack.
Final Steps & Review
Ensure the cooler is secure and the latch attachment is locked into place before every ride by pulling gently to confirm it is locked in place.
It is recommended not to exceed 15 lbs in weight capacity for the Connect+ Cooler.
For any questions or additional assistance, please contact customer support.