Step-by-Step Instructions

The Revv1 Display reset allows you to default back to factory settings for your Revv1. Please follow the steps below. 

Note: Depending on the generation of your Revv1 display, P10 settings may not be available. If your display does not have a P10 setting, please reach out to our customer service team for additional help on resetting your display. 

Step 1: Turn on your Revv1 bike and ensure bike's display is in it's main screen. Press and hold the "M" button to access the settings screen. 

Step 2: Once within settings screen, tap the "M" button to get into 0000 screen and enter code 1919. Use the + and - Buttons to change the digits, use the Power button to move to select the following digit. This allows you to get into the advanced display setting.  

Step 3: Tap the "M" button to navigate to the P10 setting; this should default to "NO" on the screen. 

Step 4: To reset the display and it's settings to factory defaults, press "+" button to navigate to YES then press and hold the "M" button to select. 

Please reach out to customer support for any additional questions.