Revv 1 Assembly Video Assembling with the help of the video guide is the recommended method to reduce questions or issues with assembly. Headlight...

The Revv 1 ships directly to your door pre-programmed as a class 2 electric bike out of the box.  The "Multi-Class Speed System” lets you switch betwe...

This article explains the steps to remove the rear wheel from the Ride1Up Revv 1 line of ebikes. The DRT uses slightly different axle nut and spacer details...

Introduction Replacing a damaged or inoperational Cadence sensor on the Revv 1 is a simple process. Please follow the instructions below. If the procedure ...

Rear Rack Installation Steps and Walkthrough Find the PDF manual instructions here: Revv 1 Rear Rack Installation Disconnect the rear light Higo electric...

This article lays out the steps to transfer/replace the freewheel and brake rotor from the Revv 1 once you have the rear wheel removed. If you haven't r...

What does the balancer do? -The balancer allows riders to plug in two batteries at once, in parallel, to power their Revv 1 electric bicycle. The dual batt...

What is the Revv 1 Battery Balancer? This device allows you to use two batteries (the second battery purchased separately here) at the same time. This effe...

In this article, we will go over the proper installation of your tensioner and chain.  Step 1- Installing the Tensioner Install the chain tensor in th...

Introduction Thank you for your purchase of a Revv1 Connect+ Rack and Handle accessory. The rack is a great way to haul cargo up to 100lbs, it can be used ...