During the course of your bike's ownership, it may become necessary to access the internal controller of the bike. This silver or black box holds some base-level programming for the bike, connects all the electronic parts together, and is vital for the bike's functionality. In this article, we will go over where to locate the controller, how to access it, and show the different wiring configurations.
Step 1: Locate the controller
Step 2: Removing the controller
Carefully cut the zip ties holding the wire bundle making sure to not damage the wires
disconnect the connectors
Disconnect the motor cable connection:
Once the controller is out, the photo below outlines what each cable corresponds to. In this model, the display, brake sensors, and throttle join into a wiring harness cable outside the frame. That harness then leads into the frame as one singular cable and plugs into the controller.