Passenger Kit Handlebar Installation
Print
Modified on: Fri, Jul 18, 2025 at 5:07 PM
1. Open the quick-release bracket and loosen the bolt enough to allow it to wrap around the seatpost.
2. Place the protective rubber swatches between the seatpost and the quick-release bracket.
3. Close the bracket and place the quick-release lever and washer. With the lever in the Open position, turn the lever clockwise to tighten the bolt to the point where you feel resistance midway to the closed position.
4. Close the lever, then test by pushing on the passenger handlebars. You may need to tighten or loosen this bolt again to ensure the bracket is tight and stable.
5. Enjoy the ride.
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.
