Oftentimes issues with electric bikes can be easily resolved by resetting the display settings back to factory defaults. This will be a great first step in getting your bike back on the road if you are experiencing issues. Here are the steps to reset your display. 


Core-5, Turris, 500 Series, Portola, and Cafe Cruiser Display

  1. Turn the bike on and ensure it is on the main screen.
  2.  Hold the (+) and power (M) button at the same time until you see dEF- N.
  3. Use the (+) button to cycle to Y.
  4. Press and hold the power (M) button to reset the display.


700 Series, LMT'D, LMT'D V2 and Rift Display 

  1. Turn the bike on and ensure it is on the main screen.
  2. Hold the (+) and power (M) button at the same time until you see dEF - N.
  3. Use the (+) button to cycle to Y.
  4. Press and hold the power (M) button to reset the display.


Revv1 Display

  1. Turn on your Revv1 bike and ensure the display is on the main screen. Press and hold the "M" button to access the settings screen. 
  2. On the settings screen press the "M" button to get to the screen showing “0000”. Enter code 1919. Your display will enter Advanced settings. Use the “+” and  “-” buttons to change the digits. Use the Power button to select the digits.  
  3. Tap the "M" button to navigate to the P10 setting; this should default to "NO" on the screen.
  4. Press the “+” button to navigate to “YES”. Press and hold the "M" button to reset.


NOTE: Depending on the generation of your Revv1 display, the P10 settings may not be available. If the P10 mode is not present, a factory reset will not be possible on your display.


CF Racer1 Display

  1. Turn the bike on and ensure it is on the main screen
  2. Press and hold the “+” and “-” buttons on the grips to access the settings.  
  3. Use the “-” button to navigate to “RESET”. Tap the “+” and “-” buttons to enter.
  4. Select “yes” and tap the “+” and “-” buttons to reset the display.


CF Racer1 Display

  1. Turn the bike on and ensure it is on the main screen.
  2. Press and hold the “M” button to access the setting menu.
  3. Navigate to “Reset” and use the “M” button to select.
  4. Select “YES” and press the “M” button to select.


Prodigy and TrailRush Display

  1. Turn the bike on and ensure it is on the main screen.
  2. Press and hold the “o” button to access the menu screen.
  3. Use the “-” button to navigate to “reset” and use the “o” button to select.
  4. Navigate to “yes” and use the “o” button to select.


For more information on the display settings of your bike see the full display manual here: Product Manual(s): All Models