700 Series

700 Series Assembly
Helpful Advice Reminders and Tips Headset Assembly: After Assembly - Tuning: Reminders and Tips: Make sure you crank arms are installed 1...
Thu, 25 Nov, 2021 at 1:19 PM
700 Series Routing Hydraulic Brake Line
If your hydraulic brake line seems too short, please avoid stressing it, do not force it. It likely just needs to be routed properly and the angle of your b...
Sun, 31 Jan, 2021 at 2:27 PM
Adjusting 700 Series fork. Preload/ compression
The fork on the 700 series has a preload adjustment, as well as a compression lockout. Its good to understand both so you can tune the fork per your rid...
Mon, 8 Nov, 2021 at 9:02 AM
How to remove 700 battery with broken knob/ knob install.
If not careful when attempting to remove the battery in your 700 series, The release knob can snap off, so do not force it, or drop the battery as droppi...
Fri, 28 May, 2021 at 6:43 PM
700 Series Motor Not Working
No power to the motor? Throttle non-responsive or PAS not working? This is no doubt the most frustrating problem to have, oftentimes on arrival after wires...
Fri, 9 Jul, 2021 at 2:02 PM
700 Series Battery Installing and Removing
If you are having issues seating your battery on your 700 series, here is a helpful video.  If you are still experiencing issues seating your battery...
Mon, 8 Nov, 2021 at 9:38 AM
Error 25 - 700 Series Tektro Brakes
Holding either brake lever when MODE is pressed to power up the bike will result in Error 25. Releasing the brake lever will clear this code. ... If Error 2...
Tue, 13 Jul, 2021 at 2:51 PM
Replacing 700 series lock cylinder
This article outlines how to replace the lock cylinder on your 700 series.  Please use the guide below for step by step instructions on replacing your l...
Thu, 11 Nov, 2021 at 1:59 PM